20mm x 1.50 Flywheel extractor magneto Puller Hollow center.
Fits MT 250 Series and MX2 cycle.
Honda MT250 1974 – 1975
Yamaha RD250 1973 – 1975
Yamaha RD350 1973 – 1975
Yamaha YZ125 1974 – 1979
Yamaha YZ250 1974 – 1979
Yamaha YZ360 1974 – 1975
HONDA MOST EARLY MT SERIES EARLY MX 2 STROKE ENGINE MODELS
YAMAHA MOST 1970s YZ125 MOST 1970s YZ250 MOST 1970s YZ360
Tips on use.
– Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
– Use copper grease on the puller threads, for long life.
– Make sure the puller is fully screwed into the flywheel.
– After tightening use a hammer on the centre and tap to jolt free [not always need].
– If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.
Part No. 00-086
Cross reference numbers ONLY.
MX-12094, K&L 35-5937
Reviews
There are no reviews yet.